24V swap with Euro headers?

[e30gentry]

Has anyone had any luck or any feed back on the EVO m3 Euro headers?

[e30gentry]

anyone?

[ZM Blue Devil]

not what you were asking but...

we have these coming in for the Betty build, ordered some extra, wont be for sale until we fit and give feedback.

[hoveringuy]

Has anyone had any luck or any feed back on the EVO m3 Euro headers?

I'm rocking Euro headers, love them!

[kalib0y]

Im using the raceland euro long tube headers and used sway bar spacers to so it will clear the sway bar. Its the only place you will hit if you are going to get the long tubes and shim up the motor a bit.
I have an extra set of spacers if you are interested.

[dsobering47]

wouldnt shimming the motor up cause problems with driveshaft angles?

[Adrian_Visser]

Yup. Kaliboy isn't talking about shimming the engine though he's talking about shimming the swaybar mounts, but Raceland headers are a different bird altogether. The Euro s50b32 headers hit the firewall btw as well as the subframe. The OP would have learned this pretty damn quickly if he bothered to use the button. Seriously this has been covered many times.

[e30gentry]

This is what i am looking at:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110682993275&viewitem=&sspagename=STRK%3AMEWAX%3AIT#ht_500wt_1173

[ck_taft325is]

I think you'll run into clearance issues if you're trying to run M/S50 in an E30 IIRC. Nando would be able to chime in more thoroughly as I'm speculating/hearsay.

[sharksforthecup]

yup. Kaliboy isn't talking about shimming the engine though he's talking about shimming the swaybar mounts, but raceland headers are a different bird altogether. The euro s50b32 headers hit the firewall btw as well as the subframe. The op would have learned this pretty damn quickly if he bothered to use the Button. Seriously this has been covered many times.

+1

[hoveringuy]

Here's what mine looked like when I got them. I cut and moved #6 runner about 1" to clear the firewall (firewall can also be massaged) and pushed the collectors up 1".

Fits like a glove now.

[dreamchasin]

what the fuck is that!?

[hoveringuy]

what the fuck is that!?

This.

[bimmerteck]

what the fuck is that!?

It's euro headers they usually come attached to these. . .


Untitled by systemdelete, on Flickr

[Matt-B]

Don't all the header pipes share the same basic curve to allow use in RHD cars?