Automatic wiring harness

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • e30f3ver
    Member
    • Jan 2008
    • 66
    #1

    Automatic wiring harness

    Hey so I have a automatic wiring harness from a 94 325 I plan on using with my swap. I have a s52 in the car already and trying to figure out the wiring now. I had a harness adapter made by Nando. But from my understanding you need to remove the automatic stuff from the harness to be able to use it. Does anyone have experience with this or maybe can point me in the right direction. Thanks fellas I want to get this car started!!!
    Tags: None
    • Wishno87
      R3V OG
      • Jul 2007
      • 6025
      #2
      My auto tranny plug is just chilling in the engine bay. You dont need to chop it off.
      Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

        Comment

        • samiam3356
          E30 Mastermind
          • Jul 2009
          • 1901
          #3
          just trace the auto wiring back and remove it. Much cleaner that way.

          Originally posted by Roysneon
          $5 shipped?
          Originally posted by MarkD
          You are a strange dude, I'n not answering any more posts from you.

            Comment

            • MR 325
              Moderator
              • Oct 2003
              • 37827
              #4
              Why do you guys bother with the auto harness? It's not like a stick one if THAT hard to find.
              BimmerHeads
              Classic BMW Specialists
              Santa Clarita, CA
              www.BimmerHeads.com

                Comment

                • BMW_TUNER
                  E30 Fanatic
                  • Jul 2006
                  • 1377
                  #5
                  I have used both now and I have to say that noth harness need to be stripped down anyway so with a cheaper auto harness it is no big deal. Just follow back the auto plugs and cut out all associated wiring.
                  1989 332IS -S-Fiddy Four-Some weight removed.
                  5 lug E36 M3 Brakes Coilovers and LTW's and No ABS.

                    Comment

                    • samiam3356
                      E30 Mastermind
                      • Jul 2009
                      • 1901
                      #6
                      Originally posted by MR 325
                      Why do you guys bother with the auto harness? It's not like a stick one if THAT hard to find.

                      Was under the impression the auto harness gave you more slack to make sure the DME can be properly mounted. My DME is mounted and there is just enough slack for it to reach and I have an auto harness.

                      Originally posted by Roysneon
                      $5 shipped?
                      Originally posted by MarkD
                      You are a strange dude, I'n not answering any more posts from you.

                        Comment

                        • nando
                          Moderator
                          • Nov 2003
                          • 34827
                          #7
                          Originally posted by MR 325
                          Why do you guys bother with the auto harness? It's not like a stick one if THAT hard to find.
                          I looked for a couple months and couldn't find one that wasn't hacked up or over $300. Ended up with an E34 harness, now I really wish I'd just modded an automatic E36 one.

                          as far as the harness you don't need to remove anything. it just won't look that nice.
                          Build thread

                          Bimmerlabs

                            Comment

                            Previous template Next
                            Working...