Hey so I have a automatic wiring harness from a 94 325 I plan on using with my swap. I have a s52 in the car already and trying to figure out the wiring now. I had a harness adapter made by Nando. But from my understanding you need to remove the automatic stuff from the harness to be able to use it. Does anyone have experience with this or maybe can point me in the right direction. Thanks fellas I want to get this car started!!!
Announcement
Collapse
No announcement yet.
Automatic wiring harness
Collapse
X
-
I have used both now and I have to say that noth harness need to be stripped down anyway so with a cheaper auto harness it is no big deal. Just follow back the auto plugs and cut out all associated wiring.1989 332IS -S-Fiddy Four-Some weight removed.
5 lug E36 M3 Brakes Coilovers and LTW's and No ABS.
Comment
-
Originally posted by MR 325 View PostWhy do you guys bother with the auto harness? It's not like a stick one if THAT hard to find.
Was under the impression the auto harness gave you more slack to make sure the DME can be properly mounted. My DME is mounted and there is just enough slack for it to reach and I have an auto harness.
Originally posted by Roysneon$5 shipped?Originally posted by MarkDYou are a strange dude, I'n not answering any more posts from you.
Comment
-
Originally posted by MR 325 View PostWhy do you guys bother with the auto harness? It's not like a stick one if THAT hard to find.
as far as the harness you don't need to remove anything. it just won't look that nice.
Comment
Comment