What the r3v-hang?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cmybimmer
    E30 Modder
    • Oct 2010
    • 894

    #31
    At it again.

    Would using an e34 icv cause this issue by any chance? I compared my e34 one to my buddies icv from his e36 s50 and the intake sizes are very different. The e36 one tapers, and the e34 one is the same size in diameter...

    (e34 one on left, e36 one on right)



    ^The e34 valve is half closed in this pic.

    Comment

    • TimKninja
      R3VLimited
      • Mar 2009
      • 2131

      #32
      Check the bracket behind your gas pedal, make sure its hitting where it was supposed too. make sure that whole assembly is smooth and doesn't stick anywhere. I had a problem where the gas pedal wasn't hitting its stop (A bracket closer to the driver side door) and it was acting a little like this. Bent it back and the problem went away.
      1985 325e M50TU(Sold)
      1991 318is Slicktop (Sold)
      1990 325is Brilliantrot S50/5 Lug Swapped.
      1992 525i Manual shitbox Winter Beater

      Comment

      • cmybimmer
        E30 Modder
        • Oct 2010
        • 894

        #33
        Hmm Ill check it out, but my throttle body does fully close

        And the e36 icv didnt do the trick :(.. The CEL and hesitation problem is gone, but the rev-hang is well alive :(

        Comment

        • cmybimmer
          E30 Modder
          • Oct 2010
          • 894

          #34
          ended up being bad spark plugs -__-..





          feels good bro

          Comment

          Working...