which valve cover gasket

[Unearth078]

i have a s52, with a m50 valve cover that aides in the obd1 conversion.
so which valve cover gasket do i get.. m50 correct?
never understood what the diffrence between the two of the gaskets were.

[coreyw]

I would think that if the m50 valve cover bolts up to the s52 head, then the gaskets are the same.

[Unearth078]

supposedly not. looks like the m50 one is the one to go with.

More or less looking for one more yey to place my order.

[samiam3356]

I would think the valve cover that you have would be the gaskets you want.

[Unearth078]

I would think the valve cover that you have would be the gaskets you want.

:|

[ForcedFirebird]

I have both motors in the shop, gimme a few a minutes...

[ForcedFirebird]

Gasket needs to match head, both valve covers are flat on the bottoms.

[Unearth078]

sweet, s52 it is then.

[jrdeamicis]

Gasket matches valve cover. I swear....

[MR 325]

It makes no difference, use either one.

[frankie591]

Any recommendations on victor reinz or an alternative? Heard both good and bad things about vr, so I'm not sure what to go with.

[328ijunkie]

wtf. You HAVE to use the VC gasket that matches your VC.