Announcement

Collapse
No announcement yet.

Bad MPGs?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    I forget what he said, but it made sense when he explained it. I'll call TRM Monday and ask.

    Comment


      #32
      Originally posted by Danny View Post
      I just dropped off my car to have the A/C put in and my friend said he thinks its the tune, he thinks TRM sent me the tune for 24lb/hr injectors instead of 21.5lb/hr injectors and that's why there is a check engine light at high rpms.
      Hey Danny, who in the bay area is making your A/C lines for you. I need to get lines made up for my car.

      I also have a very similar set up as your motor but I am running a zf trans, gas mileage doesnt seem to bad (about the same fill ups as my m20 for my commute), but my odometer stoped working so I have no real MPG as of yet.
      http://importmotorsparts.com/

      Comment


        #33
        Originally posted by CHITTY View Post
        Hey Danny, who in the bay area is making your A/C lines for you. I need to get lines made up for my car.

        I also have a very similar set up as your motor but I am running a zf trans, gas mileage doesnt seem to bad (about the same fill ups as my m20 for my commute), but my odometer stoped working so I have no real MPG as of yet.
        Hey Greg, Milt's Service Garage in Vallejo is doing them for me.

        Comment


          #34
          Cool, I use to work with Adrian, I'll have to give him a call. I was thinking of ordering a set from Zionsville, but the out of stock and price turned me off from them.
          http://importmotorsparts.com/

          Comment


            #35
            Did you find your missing mpg, Danny?
            Lorin


            Originally posted by slammin.e28
            The M30 is God's engine.

            Comment


              #36
              Not quite yet. I think a new tune from TRM using the stock MAF may have helped a bit however.

              Comment


                #37
                there's no point to the bigger MAF, anyway.
                Build thread

                Bimmerlabs

                Comment


                  #38
                  ^That.

                  Check Us out on Facebook
                  Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
                  Full Product Line Tuning
                  OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread

                  Comment


                    #39
                    E36 M50B25tu , 3.15 , stock 18mpg

                    is that bad mpg ?

                    Comment


                      #40
                      yes, realistically a stock OBDII 325/328 should get high 20's low 30's.
                      Build thread

                      Bimmerlabs

                      Comment


                        #41
                        Okay so I need to get to the bottom of this ASAP. Anyone have the specs for ohms for the Cam, O2, Coolant temp, and any of sensors that could affect fuel trim?

                        Comment


                          #42
                          Offtopic but just thought is would be interesting to some.

                          I used to get 300miles to the tank on my eta.
                          I now get 160miles per tank on my turbo m30.

                          If you're getting 300mpt on a bolt on s50 I think it's pretty damn GOOD!

                          Comment


                            #43
                            I'm not though. I get around 180 to 3/4 of a tank. So figure 240 MPT.

                            Comment


                              #44
                              I'm pretty sure even a modded S50 should get more than ~18mpg.
                              Build thread

                              Bimmerlabs

                              Comment


                                #45
                                That's why I need to start trouble shooting sensors.

                                Comment

                                Working...
                                X