Sunbelt or schrick cams

[Jason89i]

since we are on the subject of available power with cams...... have a professional time the cams with a dial indicator in lieu of the cam block. the schricks we had were +/5 degrees off (in rotation) when compared to tdc vs. the cam block. i suspect most people who are dissatisfied with the schricks did not install with a dial indicator.

cheers, jason

[328ijunkie]

I am a retailer for their tunes. Many 24v guys here are running their ECU's.

And Jason, Many of the schricks floating around out there do indeed have this problem. The fixed the issue at some point but some of the used ones youll find do have this issue.

[Beej '86 325es]

since we are on the subject of available power with cams...... have a professional time the cams with a dial indicator in lieu of the cam block. the schricks we had were +/5 degrees off (in rotation) when compared to tdc vs. the cam block. i suspect most people who are dissatisfied with the schricks did not install with a dial indicator.

cheers, jason

I am a retailer for their tunes. Many 24v guys here are running their ECU's.

And Jason, Many of the schricks floating around out there do indeed have this problem. The fixed the issue at some point but some of the used ones youll find do have this issue.

Thanks for that info, guys. With the challenging tuning problems I've been having, I'm taking the car in next on the 15th to have the camshaft alignment checked out. My engine builder was a well regarded shop, but they would never mess with Schrick cams to know something like that.

I'm also having a leak-down done just to verify my valves are closing properly.