problem with e30 s50 supercharged tune and ews

[Mesarina]

nice setup! makes me want to drive mine right now, how does it moves?

do you have more pictures of the maf and filter, if you have any...

thanks!

[NeedaE30]

Sexy as fuck.. the girl in the first pic is pretty sexy as well

[BingM3]

nice setup! makes me want to drive mine right now, how does it moves?

do you have more pictures of the maf and filter, if you have any...

thanks!

See 3.5" HFM just beneath the back of the headlight on the left side of the piping and the K & N long cylinder filter I cut a hole in the chassis to get maximum flow...the filter sits in front of the plastic cover wheel well. drives like stock until you rev past 4000 and up rpms it becomes alive. I am running 7 lbs psi...you will hang with stock new M3's and can outrun a JEEP SRT-8 and keep up with a Modena because I have ran with them.

[Mesarina]

See 3.5" HFM just beneath the back of the headlight on the left side of the piping and the K & N long cylinder filter I cut a hole in the chassis to get maximum flow...the filter sits in front of the plastic cover wheel well. drives like stock until you rev past 4000 and up rpms it becomes alive. I am running 7 lbs psi...you will hang with stock new M3's and can outrun a JEEP SRT-8 and keep up with a Modena because I have ran with them.

Nice, how did you move the abs unit?

I made a custom bracket out of the stock one, just tested it and it doesn't touch anymore :D what gears and trans do you have?

[BingM3]

Nice, how did you move the abs unit?

I made a custom bracket out of the stock one, just tested it and it doesn't touch anymore :D what gears and trans do you have?

Drilled from beneath the chassis, no need to remove the ABS...3.25 LSD from late E28 535i, 5 speed from E36M3

[Mesarina]

Drilled from beneath the chassis, no need to remove the ABS...3.25 LSD from late E28 535i, 5 speed from E36M3

Thanks for the info!

[Mesarina]

All ready! Waiting for the red label dme, chip, boost gauge and wideband...

[BingM3]

All ready! Waiting for the red label dme, chip, boost gauge and wideband...

How are you cooling it? Did you remove your AC condenser?

[Mesarina]

How are you cooling it? Did you remove your AC condenser?

Spal pusher fan, a/c is still there..

[BingM3]

Spal pusher fan, a/c is still there..

Couldn't see the fan from the set-up why I asked:)

[Mesarina]

Couldn't see the fan from the set-up why I asked:)

What did you use as a puller? Maybe i'll want to put another one..

[BingM3]

What did you use as a puller? Maybe i'll want to put another one..

I think a 10" or 12" pusher since there is hardly any room to fit a bigger fan rather than remove the condenser and put a puller from there...I just enjoy having an AC.

[Mesarina]

I think a 10" or 12" pusher since there is hardly any room to fit a bigger fan rather than remove the condenser and put a puller from there...I just enjoy having an AC.

Me too, this will be the daily driver after all...

[Mesarina]

should've went turbo... :crazy:





just ordered a high performance rebuild kit from 928motorsports...

[L8 apexr]

Bummer,think I'll do the hi po rebuild before I install mine as added insurance.How far did you get to drive it before it broke?.Driving impression?.