Announcement

Collapse
No announcement yet.

PNP Adapter Harness Wiring for m50, m52, s50, & s52 (And MORE!)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • sweet3
    replied
    Hi there,
    I didn't fully understand your question.
    These harnesses are customized on both sides (c101 and x20) based on your setup. On the one side by your fusebox (c101), the harness is customized for your particular e30.
    On the other side (x20), this side will be customized for the particular engine choice that you have in mind.

    For your 86 e30, all that you will need to do is unplug your c101 by the fusebox and the c104 connector in your glove box. Then, simply plug in the "harness adapter" using the instructions that are included with the adapter. After that is connected, simply connect the other side of the harness adapter to the new engine harness.

    Although you have all the wiring from both cars, you will still need something like this adapter harness to make everything work together (e30 cluster, oil level sensor, and A/C).

    Hope this answers your question. If not, I'll try again :up:

    Leave a comment:


  • JeLani
    replied
    Correct me if i'm wrong. But , is this for wiring the original clusters / ac / oil sensor wiring even if you already have the whole donor car? Ex ; my 86 es with my 98 m52b28 , i have all wiring components from both cars . Or is this just so you dont manually have to wire ?


    Sent from my payphone using Tapatalk

    Leave a comment:


  • sweet3
    replied
    bump

    Leave a comment:


  • sweet3
    replied
    Bump

    Leave a comment:


  • sweet3
    replied
    Bump

    Leave a comment:


  • sweet3
    replied
    March Bump

    Leave a comment:


  • sweet3
    replied
    Bump

    Leave a comment:


  • sweet3
    replied
    New Years bump!

    Leave a comment:


  • sweet3
    replied
    bump

    Leave a comment:


  • sweet3
    replied
    Bump

    Leave a comment:


  • sweet3
    replied
    bump

    Leave a comment:


  • sweet3
    replied
    Excellent, I'll send you a PM.
    And no, it doesn't matter that it has a vanos.

    Leave a comment:


  • BigBillions
    replied
    I need one

    year of car 1989 e30 IS. Motor going in m50b25tu. Some additional info needed:
    Do you plan to keep ABS, A/C, and you oil level sensor? does it matter that it is vanos motor?
    yes to all.
    Last edited by BigBillions; 11-14-2015, 09:02 PM.

    Leave a comment:


  • sweet3
    replied
    bump

    Leave a comment:


  • sweet3
    replied
    Originally posted by George E30 View Post
    Hey Im doing a s52 swap in my e30, I need a harness how can I purchase one

    Sent from my SAMSUNG-SM-G890A using Tapatalk

    Pm sent

    Leave a comment:

Working...
X