I tested the starter off the car, works fine
Sent from my SAMSUNG-SM-G890A using Tapatalk
Sent from my SAMSUNG-SM-G890A using Tapatalk
-
-
Spins and pulls out
Sent from my SAMSUNG-SM-G890A using TapatalkComment
-
What starter would u reccomend me go and buy?
Sent from my SAMSUNG-SM-G890A using TapatalkComment
-
That's a 24v starter. You need m20
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno ThreadComment
-
So from a 1989 325i ? So my starter was changed before?
Sent from my SAMSUNG-SM-G890A using TapatalkComment
-
Issue fixed...
Utilizing the early model g260 with late model provisions, I rethreaded the carrier bolt without shortening it. It unfortunately fucked with the detents and has left the trans stuck in 5th/reverse. I'll have to tear that one apart...
So basically the screeching sound was from the trans being in gear. After bleeding the slave, I was able to start her no problem. I eventually picked up another getrag 260 (this time from a late model).
Everything is a go and fired up/drove first try :)-Brad, AlphaTeam Motorwerks, LLC
91' 318iS - S54/6MT Swapped
08' E90 M3 6MT - Daily
04' Chevy Duramax CCLB - Work Truck/Hauler
Originally posted by IronJoe
Alpha Team: running through e30s, gringo icebergs, and 19 yr olds.
Originally posted by 2mAn
Brads a standup guy even though he likes buttsexComment
-
Must be nice, congrds
Sent from my SAMSUNG-SM-G890A using TapatalkComment
Comment