So I am currently in the trouble shooting and shake down phase of my build and I have a few logs that I could use some input on. They are both third gear pulls. I have leak tested the entire system at 25 psi down to the smallest seep. It is OBD1 and throwing no codes. I am wondering if there is anything else I should be looking at other than the tune being super fat as a cause for the super rich condition at WOT. It is currently just a base tune from Technica.
Oh and I almost forgot. I do live at almost 5,000 ft above sea level if that helps.
Oh and I almost forgot. I do live at almost 5,000 ft above sea level if that helps.
Comment