M50 trans mount

[bblazen]

Would I need the tilted trans mount if I use the Getrag from e34? And can I use the stock driveshaft since its the same as e30? Or does the e34 have different mounting points or larger outputshaft?

[mhuynh]

The getrag from an e34 has a larger output flange. IIRC you'll have to use a 325e, 328i, or e30 m3 driveshaft because they have the larger matching flange.

[bblazen]

The getrag from an e34 has a larger output flange. IIRC you'll have to use a 325e, 328i, or e30 m3 driveshaft because they have the larger matching flange.

Alright thanks. And mounting I can use stock mount?

[MR 325]

Assuming we're talking about the Getrag from a M50 E34 you can use the stock E30 trans brace.

[bblazen]

Assuming we're talking about the Getrag from a M50 E34 you can use the stock E30 trans brace.

Correct. I have a motor/trans from a 95 e34 touring. I also just planned on swapping transmission flanges so I can run the stock e30 driveshaft. Thanks for the help!