Hey guys, just completed an M50tu swap in my 1990 325i auto airbag coupe. Did a manual conversion, and would like to keep cruise control working. I believe I need to get an e36 cruise cable and attach it to the factory e30 cruise module, but beyond that I have no idea what to do. Any help would be appreciated!
Announcement
Collapse
No announcement yet.
Cruise Control Help
Collapse
X
-
You need 65711387004 cruise control cable (or a shorter variant if it exists.) This is assuming you're using the M50 throttle body (it doesn't fit the M52 TB.)
With the new cable in hand, it should be fairly obvious how to unclip the plastic piece to pull it out of the actuator, then unhook the cable inside.Originally posted by priapismMy girl don't know shit, but she bakes a mean cupcake.Originally posted by shamesonUsually it's best not to know how much money you have into your e30
Comment
-
You need 65711387004 cruise control cable (or a shorter variant if it exists.) This is assuming you're using the M50 throttle body (it doesn't fit the M52 TB.)
With the new cable in hand, it should be fairly obvious how to unclip the plastic piece to pull it out of the actuator, then unhook the cable inside.
Edit:
look for that tab, and push it in to remove.Originally posted by priapismMy girl don't know shit, but she bakes a mean cupcake.Originally posted by shamesonUsually it's best not to know how much money you have into your e30
Comment
-
Originally posted by Northern View PostYou need 65711387004 cruise control cable (or a shorter variant if it exists.) This is assuming you're using the M50 throttle body (it doesn't fit the M52 TB.)
With the new cable in hand, it should be fairly obvious how to unclip the plastic piece to pull it out of the actuator, then unhook the cable inside.
Edit:
look for that tab, and push it in to remove."Once more into the fray."
sigpic
Comment
Comment