I was just about to buy this:
So are you saying this is the wrong tensioner? For which motors?
So are you saying this is the wrong tensioner? For which motors?
-
As time went on, the factory developed the car each year, making it faster, more comfortable, and capable of handling at higher speeds.
You don’t want this. You want the trickiest, most dangerous, oldest model you can find. Only then can you prove to the world that you’re a man. -
Well the part no. is different from mine but it looks the same as the one I have. I would ask them just to be sure. Don't forget about the sprocket tool and air fiitting they are just as important!!sigpicComment
-
As time went on, the factory developed the car each year, making it faster, more comfortable, and capable of handling at higher speeds.
You don’t want this. You want the trickiest, most dangerous, oldest model you can find. Only then can you prove to the world that you’re a man.Comment
-
There are two chain tensioners. The one you posted, as pictured, fits directly into the head. The other one fits into the older two-piece timing chain tensioner so you must have the cup that screws into the head in order to use it properly.
EDIT: I just looked at the auction and noticed that the part numbers are all over the place. I removed the PNs until I can clear up which tensioner is which.
Comment
-
sigpicComment
-
Bringing back an old one
according to the bentley, you only need the vanos sprocket rotating tool (spanner tool) is for 3/95 and later cars...
I Didn't anythnig about the vanos air adator...?E30 now S52
2008 Suburban LTZ (Family and TT hauler)
325xiT (Sold)
sigpicComment
-
Comment
-
You can rent them off ebay for 25 a week. I think thats what I paid.Comment
-
It came with everything besides the chain tensioner and TDC pin but don't quote me on that. It has been awhile since I have done the swap. If you find it on ebay for rent ask them what is included.Last edited by e30s52; 03-15-2010, 05:00 AM.Comment
-
My head is cracked. I have a guy that has a complete head (cams, vanos, etc) that I can get for $350. If my thinking is correct I shouldnt need any special tools to just swap the head-correct? Only if I wanted to take the head in to get cleaned and checked for cracks/resurfacing. Thanks-I have just started to research this..Comment
-
You will have to remove the timing chain which requires taking the vanos off. So yes you need the tools.
You can get it VERY close without the tools. But it won't be perfect.Past Car : E30 S50 6 Speed 5 Lug 3.73
Current : Z3 S50 OBD2 (Smog Legal) 6 Speed BBS RN Dual Ear Diff
___________________________________________
BNB Designs
Engine Swaps, Fabrication, Innovation, General Repair
Richmond CA
Julian 848-248-8029
Comment
-
Definitely have the new head cleaned and checked out. Cheapest $80 you will ever spend if it's cracked.Comment
-
Right on, thanks guys. I am nervous about dealing with this vanos system for some reason. Does anyone rent the tools out?Comment
Comment