Okay,
I've started this thread in hopes of striking more thought/interest. I've narrowed down my problem. The injectors are not opening and closing. I've checked each pin on the x20 and c101, disconnected the green wire #7 (Robert K's problem), grounded the DME as well as checked to see if the injectors are grounded. My problem is; the ground is continuous instead of stagnant or pulsating on the injectors.
has anyone else had this problem?
I've started this thread in hopes of striking more thought/interest. I've narrowed down my problem. The injectors are not opening and closing. I've checked each pin on the x20 and c101, disconnected the green wire #7 (Robert K's problem), grounded the DME as well as checked to see if the injectors are grounded. My problem is; the ground is continuous instead of stagnant or pulsating on the injectors.
has anyone else had this problem?
Comment