Help! slight misfire with CEL

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hoveringuy
    R3VLimited
    • Dec 2005
    • 2680

    #1

    Help! slight misfire with CEL

    I still have a slight misfire with some roughness at cold start. Misfire is mostly at idle when the motor is warm.

    I get an occasional CEL light while driving. It will come on for a few seconds and go away. It's code 1222 which is Lambda.

    Would the O2 sensor have anything to do with cold start roughness?
    Last edited by hoveringuy; 12-28-2008, 09:35 AM.
  • jahnaboi
    E30 Mastermind
    • Oct 2006
    • 1742

    #2
    Maybe? I'm more clueless than you are.

    SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

    Comment

    • hoveringuy
      R3VLimited
      • Dec 2005
      • 2680

      #3
      Never mind.

      I'm a retard.

      The CEL for O2 was because that was still fouled. The miss was because I didn't gap my new plugs right. One of them had bent and was almost touching the center electrode.

      Comment

      • jahnaboi
        E30 Mastermind
        • Oct 2006
        • 1742

        #4
        Wtf. Lol. You just dropped it in I bet. Lol. Well good job fixing it.

        SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

        Comment

        Working...