Announcement

Collapse
No announcement yet.

Help! slight misfire with CEL

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help! slight misfire with CEL

    I still have a slight misfire with some roughness at cold start. Misfire is mostly at idle when the motor is warm.

    I get an occasional CEL light while driving. It will come on for a few seconds and go away. It's code 1222 which is Lambda.

    Would the O2 sensor have anything to do with cold start roughness?
    Last edited by hoveringuy; 12-28-2008, 10:35 AM.

    #2
    Maybe? I'm more clueless than you are.

    SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

    Comment


      #3
      Never mind.

      I'm a retard.

      The CEL for O2 was because that was still fouled. The miss was because I didn't gap my new plugs right. One of them had bent and was almost touching the center electrode.

      Comment


        #4
        Wtf. Lol. You just dropped it in I bet. Lol. Well good job fixing it.

        SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

        Comment

        Working...
        X