I guess it's that time for a 24v swap thread

[SamE30e]

I'm using a G 240.

I have another larger dilemma. Crank but no fuel pump. Don't know about spark.

[e30s52]

Did you cross the lines?

[SamE30e]

The pump doesn't turn on.

[e30s52]

Does the relay click?

[SamE30e]

Which relay is it lol. Is it one of the 3 on the harness of is it in the box?

[e30s52]

I am not sure. I think it is in the box. I dont have my bently on me lol.

[SamE30e]

No spark either.

[e30s52]

You have the correct pins hooked up? or the right ecm?

[SamE30e]

I went off the diagram I posted here. And yea, I have the ECU that came with the engine.

[e30s52]

Do you have all the sensors hooked up right?

[SamE30e]

Should be, It has no fuel and spark. So I swapped the cam and crank position sensor plugs. No dice. Thinking it might be the Crank position sensor.

Anything else I should check before I get another sensor?

[e30s52]

If you have a dvom you could check it to make sure its working.

[SamE30e]

I do actually. Whats the procedure lol.

Is it the same for cam position also?

[e30s52]

check the resistence of each sensor. Take alook at your betley. It should tell you.

[SamE30e]

haha, if I had a bentley.
FML