Hey everyone, hoping someone could help me fill the gaps in my knowledge here. i have an m52b28 swapped into my e30 running a precision 5777 turbo. It is an absolute beast now that i am getting the tuning smoothed out, but i think I am going to need a head rebuild as it appears i may have a bad valve.
One of my buddies works for a heavy equipment shop and has access to their machines shop at cost. They work on tons of straight 6's, so this would be right in their wheelhouse. He has had lots of his other projects done by them as well, so i am confident that with proper supplied specs they should be able to help me out. That being said, what am i looking for in regards to letting them know what i need? I don't want to do anything crazy at this point since the car is making more then enough power for me at this point, soi i just likely need them to clean up the head, valves, and press in new valve guides and seals. Can anyone point me in the right direction as to specs/procedures? i can't seem to find anything useful from my searching.
Comment