Will a custom chip for a red label 413 DME swap in to a silver label DME?
Red label 413 chip in to silver label?
Collapse
X
-
Red label 413 chip in to silver label?
Tags: None -
Not all Silver label ECU's have EWS. If it's a '94 it doesn't. 95+, it does.
If it's an early silver I think it should work.Comment
-
What about using a chip for 12/94+ M3 Silver Label 413 into a Red Label 413? Would that work?Originally posted by BillBraskyE36's are the Stephen Baldwin of the 3 series family. They barely hold everything together and they only sold a lot because of the popularity of their older sibling.
1989 325i Cirrusblau - Daily
1970 2500 - Malaga over Grey Cloth
2012 F350 6.7PSDComment
-
Did this ever get answered definitively?
Did this question get definitively answered? I have:
-- Fried Silver-Label 413 DME with good chip
-- Good Red-Label 413 DME with no chip.
I want to keep everything as close to stock as possible, at least until I get the car through Calif. smog referee. No sense spending money on aftermkt chips that will likely get replaced eventually
Alternatively, does anyone have a stock M3 Red Label chip for sale?Comment
-
I want to bump this thread because I just did this... I installed a 413 Red Label chip into a 413 Silver Label, and also clipped the green #66 wire coming out of the DME connector. Are those the only two necessary steps to disable EWS?
WTB: early e30 sedan front doorsComment
-
-
Do you have stock chips or something aftermarket? I found that a silver label chip won't work in anything but a 506 chip will work beautifully in a silver label 413. That's what I was running my car on, TMS 506 chip and late 413.'89 325is S50 Track Montser
'04 X5 Daily/Tow Vehicle
http://www.avarestoration.com
http://www.myspace.com/brendanfiddle
Click here if you want to be my zombie slave...
http://www.youtube.com/user/Fidhle007
Comment
-
Yup, no start using stock chips. I took the chip from my fried red label 413 and put it into a silver label 413.
WTB: early e30 sedan front doorsComment
-
hmmm. should i try putting my turner 506 chip in my 413 DME? i hope i don't fry it.Comment
Comment