So I am looking for a little bit a help with the wiring. I’ve got it all hooked up with Andrews harness and it cranks but I am getting no fuel pump signal I have a brand new fuel pump or EKP module. I noticed when I turn the car on or try and crank the car the outputs on the module never change so never signals the fuel pump I also back probed all the way through to the fuse in the fuse never sees signal either fuel pump isn’t being actuated it all. Where should I start looking for issues advice please.
-
1989 332IS -S-Fiddy Four-Some weight removed.
5 lug E36 M3 Brakes Coilovers and LTW's and No ABS. -
Figured it out. The main power relay wasnt switching. Cleaned everything and boom it fired up. It was loud as hell. I learned the hard way that my 100 mile old throwout is dead. Engine runs tranny is coming out.1989 332IS -S-Fiddy Four-Some weight removed.
5 lug E36 M3 Brakes Coilovers and LTW's and No ABS. -
Oh awesome. I just sent you a message on how to check the fuel pump relay wiring. That could still be helpful in the future.Comment
-
Andrew you are awesome and the harness is top notch.1989 332IS -S-Fiddy Four-Some weight removed.
5 lug E36 M3 Brakes Coilovers and LTW's and No ABS.Comment
Comment