Announcement

Collapse
No announcement yet.

iX wheel thread

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2002maniac
    replied
    Originally posted by 325ix View Post
    Thanks so would a et15 work ona 8 inch wheel? And what tire size should be used? I can't stand stretched tires on an 8 inch wheel.
    not a chance unless you mega stretch them.

    Leave a comment:


  • 325ix
    replied
    Thanks so would a et15 work ona 8 inch wheel? And what tire size should be used? I can't stand stretched tires on an 8 inch wheel.

    Leave a comment:


  • nando
    replied
    offset depends on wheel width. you could run ET0 on a really narrow wheel. on an 8 or 9 inch, not a chance.

    you roll the rear fenders the same way, except you trim away the plastic on the flares where they go under the lips.

    Leave a comment:


  • 325ix
    replied
    Not really my style either I was just wondering. Also would it be possible to run et0 on an ix? I know fender rolling would be required but how would you go a bout that with the flares on?

    Leave a comment:


  • nando
    replied
    you can provided you use the same tires on all 4 corners. it's rolling diameter, not width, that matters. Not my thing at all though - I can't imagine it would help with the stock ix's understeer tendancies.

    Leave a comment:


  • 325ix
    replied
    Ive been told you can't run staggered wheels on an ix. Is this true?

    Leave a comment:


  • boomer
    replied
    BBS RX 16x7,et35.



    Last edited by boomer; 07-14-2017, 04:53 PM.

    Leave a comment:


  • gw ix
    replied
    15x7 Borbet type H



    Leave a comment:


  • two240s
    replied
    16x7.5 et20 and 16x9 et15. 205/45/16 all around. Rear plastics arches are trimmed underneath and fenders rolled. Fronts clear fine. H&R sports/Koni adjustables.


    Leave a comment:


  • two240s
    replied
    Originally posted by nando View Post
    but with 205/40s.. why even bother?

    you could fit an 8" wide rim with 225s front and back no problem

    oops, I meant 205/45.

    why? for looks of course.

    different strokes you know...the cars not getting tracked and it's not a high performance car either. 205's are stock width so it's not like I'm losing any tire.

    Leave a comment:


  • nando
    replied
    but with 205/40s.. why even bother?

    you could fit an 8" wide rim with 225s front and back no problem

    Leave a comment:


  • two240s
    replied
    et15 9" wide will fit on the rear of an IX with the fender rolled. 205/40/16

    I'll have some pics posted pretty soon

    Leave a comment:


  • nando
    replied
    if you want to run 195s.. sure. but, yuck.

    you'd want a much higher offset for 9s. not even sure if they would fit at all. hardest part is the rear.

    Leave a comment:


  • pawi30
    replied
    9 inches?

    Leave a comment:


  • nando
    replied
    that depends on the width of the wheel, but you'll most certainly be stuck with stupidly skinny tires.

    Leave a comment:

Working...
X