Poly cabs on 325ix?

[Julien]

Any reason to not go with poly cabs on a 325ix as long as they are centered?


Thanks!

[nando]

Offset work fine too, as long as you are lowered.

Personally, too much NVH for me..

[flyboyx]

i suggest stock m3 bushings. that is what i always use. if you run 17" tires they will rub a little on the front of the inner fenders when you make tight turns.

[nando]

what do you mean 17" tires? If you run the proper + size, the diameter doesn't change with wheel size.. but most aftermarket wheels are likely to have a lower offset.

I don't get much rubbing with the R888s, but when I have 235/50R15s, it rubbed quite a bit at full lock.