Any rear apron/valence fit the early model?

[Jand3rson]

a stock one works. just cut off a late model apron and fasten it on. JBweld, bolts, and some weather epoxy.

No. Do it the right way and weld it on, a stitch weld every few inches is perfect. Then use automotive seam sealer to close the entire seam to the body.

[bigredguy]

janderson, do you mean weld it straight to the body? would it work to make brackets and fasten it that way?

[einstein57]

Some people just use a rivet gut and some caulking.

[White325is]

Some people just use a wood screws and some rtv.

Fixed.
:)