E30 overfenders

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • kman_e30
    replied
    Originally posted by widebodye30
    I was runing 16x9 all around et 0 with 215/45/16 tires...


    The Fenders we make add about 2" of extra flare... That being said there will be much more room for wide tires:) You will need to cut the oem flares... the entire point is to add more room under the flares.

    BTW THE FLARES ARE on 20% OFF SALE USE PROMO CODE: BLKFRI20%

    so if were to run a 16x8 et0 with a 225 50 and no spacer it would it look fitment wise something like that?

    Leave a comment:


  • sennafan
    replied
    Originally posted by widebodye30
    Yes:)
    Do you think you will ever have the doors like this place:

    Leave a comment:


  • widebodye30
    replied
    Originally posted by Kershaw
    are cf hoods part of that black friday sale?
    Yes:)

    Leave a comment:


  • Kershaw
    replied
    are cf hoods part of that black friday sale?

    Leave a comment:


  • widebodye30
    replied
    Originally posted by kman_e30
    what wheel offset are you running on this car? im thinking about running flares on my car
    I was runing 16x9 all around et 0 with 215/45/16 tires...

    Originally posted by Roysneon
    Do the Eurostop flairs actually give more room for bigger tires? Do I have to cut up my rear arches? I want to fit a 235 width tire on a 9" et 20 rear wheel. My quarters are rusted out and the PO filled them with bondo so cutting the wheel arches is no big deal.
    The Fenders we make add about 2" of extra flare... That being said there will be much more room for wide tires:) You will need to cut the oem flares... the entire point is to add more room under the flares.

    BTW THE FLARES ARE on 20% OFF SALE USE PROMO CODE: BLKFRI20%

    Leave a comment:


  • cabriodster87
    replied
    [QUOTE=Janderson;2851007]Does anyone know if there are other styles of overfenders available for the E30? All I can find are this style, and I don't like them at all. Way too many rivets, and way too round/bulbous:



    Just mount them from the inside wheel well. Make a lightweight contour flange, sandwich that with less rivets and it should look more professional. And easy to replace.

    Leave a comment:


  • Roysneon
    replied
    This pleases me. These flares are in my car's future, once I get the suspension under it.

    Eric, your PM box is full, just wanted to say thanks for the reply.

    Leave a comment:


  • MR 325
    replied
    I don't know the exact sizes but I remember that red 4 door had a 245 on the rear.

    Leave a comment:


  • Massimo
    replied
    Originally posted by Eric
    I'm running 245/35/18 right now on a wider than stock track, and I'm planning on running 285/30/18 continental Grand am takoffs for next season... So I'd say, Yes, they can fit more rubber.
    HOLY FUCK! I can't wait to see the rear end with 285.

    Leave a comment:


  • Eric
    replied
    Originally posted by Roysneon
    Do the Eurostop flairs actually give more room for bigger tires? Do I have to cut up my rear arches? I want to fit a 235 width tire on a 9" et 20 rear wheel. My quarters are rusted out and the PO filled them with bondo so cutting the wheel arches is no big deal.
    I'm running 245/35/18 right now on a wider than stock track, and I'm planning on running 285/30/18 continental Grand am takoffs for next season... So I'd say, Yes, they can fit more rubber.

    Leave a comment:


  • Massimo
    replied
    Originally posted by Roysneon
    Do the Eurostop flairs actually give more room for bigger tires? Do I have to cut up my rear arches? I want to fit a 235 width tire on a 9" et 20 rear wheel. My quarters are rusted out and the PO filled them with bondo so cutting the wheel arches is no big deal.
    I believe so, 235 should be no problem, I think some people are running 255 :)

    Leave a comment:


  • Roysneon
    replied
    Do the Eurostop flairs actually give more room for bigger tires? Do I have to cut up my rear arches? I want to fit a 235 width tire on a 9" et 20 rear wheel. My quarters are rusted out and the PO filled them with bondo so cutting the wheel arches is no big deal.

    Leave a comment:


  • kman_e30
    replied
    Originally posted by widebodye30
    The fenders on Ericks car looks the same. Its just the color of the cars which makes the flares look different I guess. They are from the same mold my friend;)



    what wheel offset are you running on this car? im thinking about running flares on my car

    Leave a comment:


  • Massimo
    replied
    Originally posted by einstein57
    Chicken or the egg my friend.
    hehe ill get the flairs first then get some custom CCW to fit the flairs.

    Leave a comment:


  • einstein57
    replied
    Chicken or the egg my friend.

    Leave a comment:

Working...