Rattle can paint that "almosts" matches e30 paint codes.

[audiquattrot]

not sure if I can chime in here, but this is for touch-up paint.

Duplicolor "VW Reflex Silver" is a spot on match for chips on Sterling Silver. Can be had at Pep Boys

https://www.amazon.com/Dupli-Color-A.../dp/B00HE68T4M

[george graves]

Edited the OG post to make a list. Please keep adding on to it.

[ZEKTI]

Edited the OG post to make a list. Please keep adding on to it.

Ones local options will vary but in any auto paint shop has been able to be place into aerial can. The placement into the can doesn’t change, unless one goes for a 2 part, but the paint one can use can be $30-150 per pint. Least that was my option locally. The bottom range of PPG has worked fine for my bumper repaints, touch up, etc. I have some cans of white around. I’ll see if I can find a spare panel and paint this week and see If it’ll match some Alpine 2 and 3.

If you want to note clear coats. The best I’ve been able to use is Spraymax 2K. It is a 2 stage so you MUST use a good respirator, tyvec suit, and cover area from overspray. It is extremely toxic but as things go it provides the best result.

Good idea for thread OP!

$33 Delphin Gray

Canned Alpine



Sent from my iPhone using Tapatalk Pro

[george graves]

Thanks for your post - awesome. (really thank you!) Good to know - But I can't seem to make the point clear. This isn't that!!!!!!!!!!!!!!!

[wilholl]

has anyone found an "off the shelf" good match for bronzit?

[Thunderzol]

Good thread OP. Not sure why ppl don’t understand the concept here about the “off the shelf” option. I would like a suggestion for salmon silver and alpine white I. Anyone?

[Staszek]

Love to find off the shelf for AW II. I want to do the engine bay, so it doesnt have to be perfect.

[RobDog]

This was the closest color to bronzit that I could find on the shelf for cheap. I painted my mtech1 spoiler trim piece with it. It was a perfect match but the New Mexico sun has turned it darker over the 2 years since I painted it. Probably should have put some clear coat on it but I was to excited to get it on my car.

https://www.r3vlimited.com/board/picture.php?albumid=2337&pictureid=18180

https://www.r3vlimited.com/board/picture.php?albumid=2337&pictureid=18182

https://www.r3vlimited.com/board/picture.php?albumid=2337&pictureid=18181

[wilholl]

This was the closest color to bronzit that I could find on the shelf for cheap. I painted my mtech1 spoiler trim piece with it. It was a perfect match but the New Mexico sun has turned it darker over the 2 years since I painted it. Probably should have put some clear coat on it but I was to excited to get it on my car.

https://www.r3vlimited.com/board/picture.php?albumid=2337&pictureid=18180

https://www.r3vlimited.com/board/picture.php?albumid=2337&pictureid=18182

https://www.r3vlimited.com/board/pic...ictureid=18181

That's what I am talking about...
I'll check it out. Thanks

[RobDog]

I found a good match for zinno but can not find the paint can now. I painted my dads front valence on his 86 zinno 325es and it turned out good. I will report back when I actually find the dam name and brand of the paint I used.

https://www.r3vlimited.com/board/picture.php?albumid=2337&pictureid=15197

https://www.r3vlimited.com/board/picture.php?albumid=2337&pictureid=18179

[jgilber0]

Slightly off topic, but perhaps helpful:

For my BBS Style 5 basketweave aluminum center rings, I used Wurth 0893351930 High Gloss Clear Lacquer on top of Wurth 892180S Silver Wheel Spray Paint.

You can find both as a kit here for $37.99 + shipping. https://www.autopia-carcare.com/eins...l#.W5zZLBopCf0

I only painted the metal rings, not the plastic centers, as lacquer can sometimes score plastics.

Clear lacquer looked glossier after two coats, initially went on flat. Overall look is a nice match. Wheels are presentable again after adding new BMW 70mm roundels.

[Das Delfin]

Somewhat related - Avery Gloss Gray Metallic wrap matches Delphin pretty well

[ScottSneed]

This was the closest color to bronzit that I could find on the shelf for cheap. I painted my mtech1 spoiler trim piece with it. It was a perfect match but the New Mexico sun has turned it darker over the 2 years since I painted it. Probably should have put some clear coat on it but I was to excited to get it on my car.

https://www.r3vlimited.com/board/picture.php?albumid=2337&pictureid=18180

https://www.r3vlimited.com/board/picture.php?albumid=2337&pictureid=18182

https://www.r3vlimited.com/board/pic...ictureid=18181

Does anyone know what this was?