Announcement

Collapse
No announcement yet.

Rear bumper conversion - Can someone help?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Rear bumper conversion - Can someone help?

    I have a '91 vert that has the DB bumpers that i will be converting to plastic bumpers. I have the front figured out so that's no problem. The rear is where i'm not too sure of. I have purchased a rear bumper but will i need to install a valance? Or can a valance even be easily installed? I was looking at the ACS late model valance but i was told that it would required a lot of work to make it work.

    Would appreciate some feedback.

    Thanks!

    #2
    I converted my 1988 cab to plastic and no valance required.
    RESTART

    Comment


      #3
      Originally posted by restart View Post
      I converted my 1988 cab to plastic and no valance required.
      How does it look? mind sharing a pic?

      Thanks!

      Comment


        #4
        https://share.icloud.com/photos/0gb4...grkT3De9Q1ngHQ
        RESTART

        Comment


          #5
          IMO, it needs a valance...some cut the stock face lift valance off and weld it/bolt it on and some go aftermarket.
          "I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj

          85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
          88 M3 - LACHSSILBER/SCHWARZE
          89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
          91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER

          Comment

          Working...
          X