polishing, giving it a shot sites for techniques?

[M-technik-3]

http://www.caswellplating.com/buffman.htm

I have a nice 1/2 hp electric motor for grinding has a decent length shaft haha he said shaft.

so gonna buff out my BBS hardware, purchased some cheap cotton wheels and some red compound. First stud has come out good but damn is this a tedious process. How do you get the recessed section polished? for those who have done this?

[grays]

get yourself a speed variable angle grinder with a sanding pad 1st then comes the buffing.

done this many times with no prbs, also if needed a dremal

[ForcedFirebird]

I started with a 7" polisher with a sanding pad on it (120grit) to remove the clear anodizing. Then moved on to 320, 400, 500, 1000, 1200, polish.

[jeffnhiscars]

John

I have 4 sets of db's here so if you feel like a working vacation.. :-)

Seriously, how much time is in that front bumper ?

[M-technik-3]

Yeah right now I'm doing just bolts and nuts for my BBS wheels. I have about 4 sets of bolts to polish so it's gonna take some time to do. Some are coming out better than others. I have had to go back over them a few times.