Dead pedal for vert

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bigdrick323
    Mod Crazy
    • Feb 2012
    • 616

    #16
    Please, someone send me one for free

    Sent from my HTC One V
    sigpicMy Project!

    Official North Texas Bimmers Club E30 Representative

    www.BimmerAlliance.net

    "If you have questions about events or need help in the DFW area don't be afraid to contact me."

    Comment

    • george graves
      I waste 90% of my day here and all I got was this stupid title
      • Oct 2003
      • 19986

      #17
      Does massive lee make one for verts?
      Originally posted by Matt-B
      hey does anyone know anyone who gets upset and makes electronics?

      Comment

      • bigdrick323
        Mod Crazy
        • Feb 2012
        • 616

        #18
        Originally posted by george graves
        Does massive lee make one for verts?
        No, and we would need at least 20 people ordering before he'll make them.

        Sent from my HTC One V
        sigpicMy Project!

        Official North Texas Bimmers Club E30 Representative

        www.BimmerAlliance.net

        "If you have questions about events or need help in the DFW area don't be afraid to contact me."

        Comment

        • robrez
          No R3VLimiter
          • Jul 2008
          • 3376

          #19
          Originally posted by bigdrick323
          No, and we would need at least 20 people ordering before he'll make them.

          Sent from my HTC One V
          He'd probably need something to make a repro from, which would be a problem since no one has one.

          If he could adapt his m-tech pedal repro to fit a vert, I'd be all in.



          Euwerks Engineering would probably make one too, if there's enough interest.

          But I prefer the m-tech I repro because it is bolstered by an arm that attaches to the clutch stop. My vert's dead pedal area is already squished, so I don't think the Eurwerks pedal below is going to help much.



          Last edited by robrez; 04-11-2013, 10:01 AM.
          sigpic
          January 2012 COTM

          Comment

          • ///M42 sport
            No R3VLimiter
            • Oct 2003
            • 3952

            #20
            do the dead pedals screw into the floorboard? or just the carpet?
            Renting my rear wheel bearing tool kit. SIR
            http://i25.photobucket.com/albums/c5...ps6debf0b0.jpg

            Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

            Comment

            • jozzze2000
              Noobie
              • Mar 2011
              • 26

              #21
              Just the carpet and speaker holes...

              Is anybody interested in replica of ///M dead pedal (non vert), currently 8 in stock:



              Sorry for offtopic...
              Last edited by jozzze2000; 04-16-2013, 02:58 AM.

              Comment

              • bigdrick323
                Mod Crazy
                • Feb 2012
                • 616

                #22
                Originally posted by jozzze2000
                Just the carpet and speaker holes...

                Is anybody interested in replica of ///M dead pedal (non vert), currently 8 in stock:



                Sorry for offtopic...
                Really, just teasing us.

                Sent from my HTC One V
                sigpicMy Project!

                Official North Texas Bimmers Club E30 Representative

                www.BimmerAlliance.net

                "If you have questions about events or need help in the DFW area don't be afraid to contact me."

                Comment

                • robrez
                  No R3VLimiter
                  • Jul 2008
                  • 3376

                  #23
                  Originally posted by jozzze2000
                  Is anybody interested in replica of ///M dead pedal (non vert), currently 8 in stock:

                  Do you have pics of the actual pedal installed in a vert?
                  sigpic
                  January 2012 COTM

                  Comment

                  • bimma360
                    Forum Sponsor
                    • Oct 2003
                    • 1937

                    #24
                    Originally posted by robrez
                    Euwerks Engineering would probably make one too, if there's enough interest.

                    But I prefer the m-tech I repro because it is bolstered by an arm that attaches to the clutch stop. My vert's dead pedal area is already squished, so I don't think the Eurwerks pedal below is going to help much.



                    We would totally make a dead pedal for the vert. Our current dead pedal is very similar to the ACS pedals pictured in this thread. I'm sure we can modify our design to fit verts. Like you said, if there is interest we'll make it.

                    BTW our dead pedal's width measures at 3.5", so you can compare that to your vert's dead pedal area.
                    E30 Dinan Turbo

                    Comment

                    • jozzze2000
                      Noobie
                      • Mar 2011
                      • 26

                      #25
                      Originally posted by bigdrick323
                      Really, just teasing us.

                      Sent from my HTC One V
                      It is not a teaser...

                      Comment

                      • jozzze2000
                        Noobie
                        • Mar 2011
                        • 26

                        #26
                        Originally posted by robrez
                        Do you have pics of the actual pedal installed in a vert?
                        As stated above, this is non vert...

                        If there is enough intrest I can check what mods should be done to fit in a vert, so there could be a vert version available.

                        Comment

                        • robrez
                          No R3VLimiter
                          • Jul 2008
                          • 3376

                          #27
                          Originally posted by jozzze2000
                          As stated above, this is non vert...

                          If there is enough intrest I can check what mods should be done to fit in a vert, so there could be a vert version available.
                          OK, sorry I missed that. Yes, I'd be interested in knowing if the m-tech dead pedal can be modded to fit a vert.
                          sigpic
                          January 2012 COTM

                          Comment

                          • reelizmpro
                            R3V OG
                            • Dec 2003
                            • 9447

                            #28
                            Originally posted by jozzze2000
                            Just the carpet and speaker holes...

                            Is anybody interested in replica of ///M dead pedal (non vert), currently 8 in stock:



                            Sorry for offtopic...
                            No worries. This is the first I've heard of someone reproducing the pedal with the ///M on it. It looks great. How much are you charging? I'm sure they will fit with a lot of trimming. Problem is I don't know anyone who has actually trimmed a factory M deadpedal since they are so rare and expensive. I wouldn't do it but if a replica is cheap enough, I might.
                            "I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj

                            85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
                            88 M3 - LACHSSILBER/SCHWARZE
                            89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
                            91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER

                            Comment

                            • bigdrick323
                              Mod Crazy
                              • Feb 2012
                              • 616

                              #29
                              If someone can custom fit a replica into the vert, I would be interested in a beta test product or a diy on it.

                              Sent from my HTC One V
                              sigpicMy Project!

                              Official North Texas Bimmers Club E30 Representative

                              www.BimmerAlliance.net

                              "If you have questions about events or need help in the DFW area don't be afraid to contact me."

                              Comment

                              • jozzze2000
                                Noobie
                                • Mar 2011
                                • 26

                                #30
                                OK, I'll see what can be done, I'll let you know next week.

                                Comment

                                Working...