Years ago I bought a used dash with a dime sized bubble in the contour of the storage tray. Over the years, it has grown 2-3x it's original size. So I sliced it open and filled it with 3M windshield adhesive and used a socket to keep it contoured while drying. I'm pretty satisfied with the results and it's in an inconspicuous area anyway. I'm just curious what others have done to remedy bubbling.
-
Last edited by reelizmpro; 01-28-2016, 03:20 PM."I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj
85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
88 M3 - LACHSSILBER/SCHWARZE
89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER
-
I haven't done it but my thought was to use a syringe so as not to cut it.Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com
https://www.r3vlimited.com/board/sho...86#post4944786
Alice the Time Capsule
http://www.r3vlimited.com/board/showthread.php?t=360504
87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220 -
In my case, poking a hole did nothing since it was in the contour. I had done that but had to make the cuts larger just to get the vinyl back down. I think if it was smaller and on a flatter surface then perhaps a syringe would have sufficed."I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj
85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
88 M3 - LACHSSILBER/SCHWARZE
89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER
Comment
Comment