Announcement

Collapse
No announcement yet.

Seat track fitting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Seat track fitting

    I'm working on fitting replacement seats in my e30, but passenger seat rear left bolt isn't lining up or threading. Any ideas to get it to align and thread correctly? Thanks

    Sent from my Pixel 2 using Tapatalk

    #2
    Wiggle the seat and pry things if absolutely required. Make sure you didn't do something dumb like cause the runners to be set to different notches or tightening the nuts down all the way in front.

    Comment


      #3
      Got your tongue poked out slightly? I find it works best when i poke it out just slightly to the left.

      In all seriousness i found the last time I put a seat in that one of the bolts had slightly bent. if this has happened to yours bend it back without ruining the threads.

      Comment


        #4
        Originally posted by roguetoaster View Post
        Make sure you didn't do something dumb like cause the runners to be set to different notches.
        This is the most common issue and a disconnected cross bar is right behind it.
        Deck Lid and soft top Shocks on hand

        Seat shocks on hand for immediate shipment
        https://www.r3vlimited.com/board/sho...86#post4944786
        Alice the Time Capsule
        http://www.r3vlimited.com/board/showthread.php?t=360504
        87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220

        Comment

        Working...
        X