If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I recognize pretty much all those wheels and could tell you who made them....sad.
Well, posterity, you will never know what it cost us to preserve your freedom. I only hope that you will make a good use of it. If you do not, I shall repent in heaven that I ever took half the pains to preserve it.
This is my Nardi. Does anyone know what it's called? The PO professionally painted the center Diamondschwarz, which can go unnoticed if one doesn't know his Nardi, but it bugs me :( Also, it surprised me that the hub it came with is the same hub that my stock Mtech I had, even has a BMW P/N . Is this normal? I have no idea how they morphed the hub with the wheel...but it look likes they were made together, and are flawless.
My other "fun" wheel, borrowed from my brother's 240SX - Personal Marine wheel :D
Anybody have an aftermarket steering wheel hub lying around that they want to get rid of?
I do, I have a Momo e30 Hub I'm down to sell.
Well, posterity, you will never know what it cost us to preserve your freedom. I only hope that you will make a good use of it. If you do not, I shall repent in heaven that I ever took half the pains to preserve it.
does anybody know if an MT2 wheel off of a 92 mtech vert will fit a 92 non mtech vert w/airbag? or will I have to use the spacer and turnsignal stalk trick...
does anybody know if an MT2 wheel off of a 92 mtech vert will fit a 92 non mtech vert w/airbag? or will I have to use the spacer and turnsignal stalk trick...
You'll have to use the spacer/turn signal trick, as well as deactivate the ABS system as you are putting a non airbag wheel on an airbag car. Without this fix your ABS light will stay on. It's an easy 5 min. fix, SEARCH on this board.
I get to install my Nardi wheel now! Andrew and I just made this:
It's an adapter ring that will allow the Nardi to bolt to the Momo hub. They want $35 for one of these on ebay, we made one in 2 hours and for the cost of 12 screws and a tap.
Comment