If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Just put in the new dash and when I do the blinkers, I get a bzzzz sound and no blinkers. Lights work, brakes work,, etc... My only problem is the turn signals... HELP!
Thanks in advance...
- Y2K M Coupe (DD, Track Rat)
- '08 Land Cruiser (Family Hauler/Tow)
- '90 E30 4/5sp. (DD/ Son)
- '87 AW11 Mr2 (AutoX-Rally-Track)
- '06 Royal Enfield Bullet 350 w/sidecar (weekend cruiser)
Future
- E92 M3
- 88-91 M3 (maybe.. if I can find one, regret selling in 05)
Remove the bottom cover from the steering column and tap the relay. Pretty sure the buzz is from the relay. It could be the relay itself or a bad contact/bulb somewhere.
"I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj
This just recently happened to me during the dash swap. If its anything like what i did - I had the wrong harness plugged in on the rear defroster and hazard buttons - switch 'em - should solve the problem.
This just recently happened to me during the dash swap. If its anything like what i did - I had the wrong harness plugged in on the rear defroster and hazard buttons - switch 'em - should solve the problem.
yea probably what it is since he changed the dash.
"I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj
Comment