ELLIPSOIDS!!

[parkerbink]

Ok so what relay do I mod & how??

[nando]

check ryan stewart's ellipsoid guide. it's pretty easy, I didn't cut anything like he did, I just stuffed a peice of 16 gauge wire into the pins and jammed the relay on top, works like a charm and I'll never have to do it again :)

[parkerbink]

You guys rule!!
Thanks Ryan for the guide!



you can't tell but the city lights are on too!

I drove it 500 miles yesterday starting at 3am man these are so much better (with one or the other on) I can only imaginh how good they are now that I have all 4!

THANKS!!!!!!!!!!!!

On to the springs!!!

[KenC]

Get some Osram Silverstar H1s for them.

[parkerbink]

Thats what I have!
The bulbs in the packages are the phillips that were in the lenses. One out of the four were dead.

[hamann318is]

Much better! :D

[parkerbink]

THANKEWVERYMUCH!!!!!!!!!

[MR 325]

Lookin good.

[m42technic]

The Silverstars come in prettier packages now I see. :P

[parkerbink]

Here's the city lights



All done!

[parkerbink]

check ryan stewart's ellipsoid guide. it's pretty easy, I didn't cut anything like he did, I just stuffed a peice of 16 gauge wire into the pins and jammed the relay on top, works like a charm and I'll never have to do it again :)

I drilled the holes but didn't solder the wire. I used a huge piece of power wire from my amp, not sure what gauge it is but only 1/2 would fit through a hole bigger than the one thats already there.