Any ideas? My windows/ window switch lamps still have power after i have switched the ignition off. Does anyone have a wiring diagram or had similar problems?
Announcement
Collapse
No announcement yet.
windows still have power after ignition switched off.
Collapse
X
-
I do have something similar going on with my car. I get power
to the switch if one of my door is open enough so the dome
lights are on...
It only works if the dome lights are on if there not then I don't
have power to the switchs.
I think its kinda neat but don't think its supose to be that way...
Charley
-
Wow, that's a new one.
Pull Fuse 19, see if the window switches are still lit with the door open.-Dave
2003 Lincoln Towncar | 1992 BMW 325iC | 1968 Cadillac Deville


Need some help figuring out the ETM?
Comment
-
That would take incredible stupidity...but I have seen a radio installed with the acc and dash lights connected together...Originally posted by george graves View Postalarm install gone wrong?
Comment
-
How will I know if its reversed? And you are talking about the window circuit breaker switch for the windows right?I know that thing works because I was sitting in my car with the windows up wondering why they wouldn't go down when I first got the car.Originally posted by bmw325csi View Posti had this problem in the past too. remove the circuit breaker switch and check if the 2 wires are reversed.
I will try that tomorrow when there is light out.Originally posted by DaveSmed View PostWow, that's a new one.
Pull Fuse 19, see if the window switches are still lit with the door open.
I don't have an alarm system.Originally posted by george graves View Postalarm install gone wrong?'87 Zinno 325e
Comment



Comment