Announcement

Collapse
No announcement yet.

turn signal problem! help please!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    turn signal problem! help please!

    flasher relay makes a buzzing! i've changed with two working relays, as well as another working signal stalk....still doesn't work...


    1989 325is / 2.7, 274 cam, e30 M3 5-lug
    1989 LN106 Hilux / 3.0TD SFA
    1974 2002tii / stock
    2002 IS300 / 5spd LSD

    #2
    There is likely a short somewhere causing a high load on the flasher and making it buzz (basically it is flashing at VERY high speed). I'd start by looking at the bulbs at each corner, cleaning the sockets and checking all the grounds. This type of stuff is usually caused by corroded sockets.

    Comment


      #3
      will do. happens both left and right directions; hazards also no dice.
      1989 325is / 2.7, 274 cam, e30 M3 5-lug
      1989 LN106 Hilux / 3.0TD SFA
      1974 2002tii / stock
      2002 IS300 / 5spd LSD

      Comment


        #4
        Originally posted by NitroRustlerDriver View Post
        There is likely a short somewhere causing a high load on the flasher and making it buzz (basically it is flashing at VERY high speed). I'd start by looking at the bulbs at each corner, cleaning the sockets and checking all the grounds. This type of stuff is usually caused by corroded sockets.
        How do you suggest cleaning the sockets?
        Originally posted by Sagaris
        He wasn't around because he spent 7 years in jail for assault. There was a group of guys doing a 24v swap on someones car and one of the neighbor kids came over and starting too many questions. Tempers flared, sawzalls did work, and he cut the kids leg off. The victim later joined this forum under the name "5toes".

        Comment


          #5
          sand them, contact cleaner, etc. Try another hazard switch Mike. Easy enough to change out and it does affect other things as well.
          "I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj

          85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
          88 M3 - LACHSSILBER/SCHWARZE
          89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
          91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER

          Comment


            #6
            You fix this problem?
            sigpic

            1999 528it - Daily Driver “Dad Wagon”
            1991 325is - 2.8L Budget Stroker Garage Slut
            1991 318is - Sold
            1986 325 - Sold

            Instagram - Lamoursum

            Comment


              #7
              Originally posted by reelizmpro View Post
              sand them, contact cleaner, etc. Try another hazard switch Mike. Easy enough to change out and it does affect other things as well.
              i tried that, as well as the relay and signal stalk.

              Originally posted by GodIse30 View Post
              You fix this problem?
              i ended up selling the car with no signals :/
              then it was flipped on ebay.
              1989 325is / 2.7, 274 cam, e30 M3 5-lug
              1989 LN106 Hilux / 3.0TD SFA
              1974 2002tii / stock
              2002 IS300 / 5spd LSD

              Comment

              Working...
              X