Scyteck Astra A20 alarm install

[Staszek]

So I searched and read through a lot of threads, my brain doesnt always work so great when it comes to wiring, never been my strong suit.

I am trying to figure out how many relays I actually need.

I know I need one for the door locks since my alarm is only 500ma.

I have the OEM light control module relay, can I just tap that for the dome lights?

Do I need a relay for the blinkers, or can I use two Diodes to make it cleaner?

I found this diagram on here that I was planning on partially following.


Here is my wiring diagram

[Staszek]

Anyone?

[84driver]

Diodes for the parking lights. I'm pretty sure you can use the OEM dome light relay. I made that diagram but that was 4 years ago so I'm a little rusty. It's actually easier than it looks.

Short answer: just two relays for the locks.

[Garrick2007]

I did a partial follow on that diagram too while using a few other sources, came out perfect, i even wired up a modern clown nose mirror so u could use its light rather then the stock one, came out really good, if interested: http://www.r3vlimited.com/board/showthread.php?t=360401 If your not happy with that alarm check out the Viper 5305V Such a dope alarm for only $100 on amazon.