Hotwiring an e30

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SamE30e
    R3V Elite
    • Sep 2007
    • 4319

    #31
    Originally posted by dillsnick
    What if it's a 13 button and the code is on? How do you get the fuel pump going...
    Pull the kick panel, black box, unplug the obc connector. and I think there is a single green wire.
    1985 325e 2.8 Turbo VEMS

    Comment

    • Gruelius
      Wrencher
      • Oct 2009
      • 298

      #32
      if you got the key pin 11 to 14 on the diagnostic connector.

      Found that out today saved me buying a starter :D
      RIP 84 323i coupe 5spd w/ 14psi
      89' 318i

      Comment

      • StereoInstaller1
        GAS
        • Jul 2004
        • 22679

        #33
        Originally posted by Gruelius
        if you got the key pin 11 to 14 on the diagnostic connector.

        Found that out today saved me buying a starter :D
        that with a little pushbutton is how you move the motor so you can adjust valves...but this thread is about how to hotwire: see, there is no key...

        Closing SOON!
        "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

        Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

        Thanks for 10 years of fun!

        Comment

        • TexasTerp
          No R3VLimiter
          • Jan 2009
          • 3541

          #34
          haha, nice revival! Now that I think about it you could just remove the tumbler in it's entirety from the column which would unlock the wheel and then cross the wires underneath.
          stephenbrody.com

          Comment

          Working...