IS Decklid Spoiler Installation Template

[Inline Sex]

Yeah the strength is definitely not an issue. The only thing I wonder about is how it actually holds up to weather over time. Make sure you get the outdoor kind too.

[fpmbw325]

avus didnt you have a diagram with the measurements before, im trying to do this project soon n can use that info.

[MrNatural]

Just some FYI, all trunk lids are factory marked underneath for OEM spoilers...all you have to do is drill baby drill!

[reelizmpro]

Just some FYI, all trunk lids are factory marked underneath for OEM spoilers...all you have to do is drill baby drill!

Really? what about 84-85 model year trunks?

[maneeno325e]

Really? what about 84-85 model year trunks?

wondering about this too. i looked at mine and didnt see any markings..

[MrNatural]

Well I may have spoke incorrectly. I had a bad experience installing my first spoiler and it leaked horribly. Found a perfect match color wise on ebay and the seller told me this when I said I would have bought it if it had the holes for the spoiler.He said he could drill them for me and they were all marked underneath.My old lid was too routed out to check. Sorry for any confusion.

[millsamus]

Thanks just what I was looking for!!!!!!!!!

[blackhawkimpact]

Trunk lids are predrilled underneath, covered in silicone or something. Took me 2 minutes to drill and install the lip. No leaks neither

[grays]

good to know

[bmwstephen]

Trunk lids are predrilled underneath, covered in silicone or something. Took me 2 minutes to drill and install the lip. No leaks neither

so there is an imprint of where to drill on the sheet metal itself? what's the point of the template

[redsubdivisions]

Trunk lids are predrilled underneath, covered in silicone or something. Took me 2 minutes to drill and install the lip. No leaks neither

If this is true, then I must be insanely stupid to have not seen them. Care to point out with a picture or two?

[blackhawkimpact]

If this is true, then I must be insanely stupid to have not seen them. Care to point out with a picture or two?

I would but I already drilled out the holes. All decklids I've seen at the junkyard are predrilled. I'll take a pic next time I go.

[blackhawkimpact]

so there is an imprint of where to drill on the sheet metal itself? what's the point of the template

I believe the earlier models didn't come predrilled but I've seen early models predrilled. I'll take a pic of an early and late decklid next time I'm at the yard

[Vtec?lol]

are these the same holes to use with e28 and mtec spoilers as well?

[ethirtydavid]

a template underneath the drunk .......lol wow, how'd I miss that one-