IS Decklid Spoiler Installation Template

[jflip2002]

James and I just have large ass slots from our guess work. What ever, the spoiler covers them anyways haha.

+1. Mine was pretty close though. Who cares, the spoiler covers it, just seal with Silicone.

[SamE30e]

I put silicone on the holes then put it on, seals perfectly, no leaks.

[Desaevious]

Bump from the grave. I just used this template and my IS spoiler is now mounted perfectly. Thanks for the scans.

[Erik]

If anyone has an AlpineWhite trunk lid they want to DRILLLL holes into, let me know first!!! I will trade with you, mine is in very good condition and is ready for IS/MT spoiler installs ;)

[Aptyp]

LOL. for my girlfriend's car, I just pulled studs out and used 3M tape.

[bimma360]

So this will work for the mtech 1 spoiler as well?

Dave

[Avus E30]

Just for a fall down the screen again for those that may have never seen.

[M3 Ryan]

So this will work for the mtech 1 spoiler as well?

Dave

Yes, the m-tech1 has the same mounting holes as an iS spoiler.

[distorto]

LOL. for my girlfriend's car, I just pulled studs out and used 3M tape.

i thought about trying this. did it work?

[ethirtydavid]

I only post this because sometimes it is easier when you see it drawn out. anyways, the numbers are correct - here is how I went about it..



















hope this helps, peace
ethirtydavid

[distorto]

thanks a lot for the pictures! i am installing an E28 spoiler, so i don't think the numbers will work.

this is helpful though, i don't have to imagine as much now.

[thereisnoyun]

I drilled once and use the tape method, it was 100% perfect fit the first time. I thought the directions and dimension was perfect. This was an awesome template.

[sickbro91]

is the spoiler rubber?

[884door]

is the spoiler rubber?

yep.
well "elastrogen" or something like that.

Feels like rubber to me.

[neo328ci]

I only post this because sometimes it is easier when you see it drawn out. anyways, the numbers are correct - here is how I went about it..



















hope this helps, peace
ethirtydavid

i was weary about drilling into the truck until i saw this. good job! :up: