What 4x100 wheels will fit e30s?

[2002maniac]

I'm 7.5" wide ET20 and no rubbing or fender touching, and my car is lowered about 2.5" in the front! 205 tires though. If you ran 16x8" with 225's I think it would fit with a 25-27mm offset.

Where did you get your 16x7.5 rotas? I cant find them anywhere. Everyone has 16x7 only

[rwh11385]

the wheels are free so i figure why not give it a try

good answer. yeah, give them a try with a moderate ride height and nonwide rubber.

all else fails, sell them to a e21 owner

[aeryk7]

looked up acura on tirerack and there was some nice rims that had a 38mm offset

[sticksdaman]

the wheels are free so i figure why not give it a try

[rwh11385]

Your car would just look stupid. Undersizing doesn't help me much...i'm tucking tire regardless. But you might use it to cheat. Still, if your springs are soft it doesn't matter it they are too short to reach the fenders while static.

why not find fucking wheels that fit and save yourself a hassle? e30-thinking < *

[Digitalwave]

If you want them sticking out of the fenders a couple inches you can run whatever you want. Undersizing tires doesn't stretch them.

[sticksdaman]

so i couldnt just run undersized tires like say 205/50?

[Digitalwave]

195/55?

[sticksdaman]

how stretched?...keep in mind my car is lowered approximately 1.6 inches

[Digitalwave]

Some. And it's more like some have 72.2mm and use rings to make up the difference.

True of Miata wheels, etc. Like the SSRs B3nder was posting about which use hubcentric centering ring, obviously can have that switched out. But most of those wheels would still need spacers.

I honestly have never seen a 4x100 wheel on the market with less than a 57mm centerbore, except for Miata wheels. My rims and almost all Rotas are 67mm, thats why I said that number.

15x7 ET12 will stick out the fender but with stretched tires you could run it.

[rwh11385]

no. not really. maybe if you want to drive a stock height e30 and look like a mexican.

i've heard ronal et15's working, and my et17, but you're just getting redic.

[sticksdaman]

what about 15x7 et12? off of an e21 3 series? will they fit?

[rwh11385]

Some. And it's more like some have 72.2mm and use rings to make up the difference.

True of Miata wheels, etc. Like the SSRs B3nder was posting about which use hubcentric centering ring, obviously can have that switched out. But most of those wheels would still need spacers.

[Digitalwave]

What I meant was aftermarket Honda rims have huge centerbores, like 67mm, to fit all sorts of cars.

[Screaming_bmwe30]

Some hondas have larger bores such as the preludes. they have a different bolt pattern...but most aftermarket wheels have a dual 4x100 and 4x112.5 or whatever that larger size is. His car needed no spacers for them, and they fit snugly on his hub. I put them on my e30 with some 10mm spacers and the 18" wheels fit perfectly.