Miller W.A.R. Machine

[brody]

The muffler is a 3.0" inlet. I will grab the part number in the morning.

[325ix]

The muffler is a 3.0" inlet. I will grab the part number in the morning.

Thanks! I can't find a 3" inlet anywere on there site with tips.

[BlUe E30]

so with the 2.5 you have it open up to a 3 right before the muffler? sorry may be a stupid question.

[digger]

WHat is required to run the smart fan? I don't run motronic will i still be able to use it?
Any idea on what the gains of this mod alone are?

What about the induction kit, will you offer one that simply bolts to the throttle body without the MAF but with the elbow and ICV mount?

[brody]

WHat is required to run the smart fan? I don't run motronic will i still be able to use it?
Any idea on what the gains of this mod alone are?

What about the induction kit, will you offer one that simply bolts to the throttle body without the MAF but with the elbow and ICV mount?

Yes, the smart fan is controlled by the Motronic ECU, it will not work with a standalone at this time. The gains vary, we have seen as much as 3 to 4 HP on a naturally aspirated engine 5 - 7 HP on a boosted engine.

We will not be offering variances of the induction kit.

[eugeman]

We will not be offering variances of the induction kit.

Why not, you do for the M30?
That's a shame, you probably would have a pretty good lineup of people to buy if you did. ;)

[nando]

are you making over 200-250hp? if not then that should be sufficiant. but i understand i want 2.5 also

single 2.25" is far smaller than stock. can you say butt-plug?

[brody]

Why not, you do for the M30?
That's a shame, you probably would have a pretty good lineup of people to buy if you did. ;)

It isn't worth sitting on the stock. We will sell more PSIK as they are than we would special ones for special circumstances.

[325ix]

Did you get that part number?

[brody]

Did you get that part number?

Yup, my bad it necks down, not up. The muffler we used was p/n 14816 Magnaflow.

[walktheboard]

i <3 this whole thread

[brody]

One step closer to shipping the first five units. Just waiting for the splash shields to arrive.

[digger]

One step closer to shipping the first five units. Just waiting for the splash shields to arrive.

surely you could sell that kit but leave out the electical stuff?

[CorvallisBMW]

surely you could sell that kit but leave out the electical stuff?

Why? The MAF conversion is probably the best/buck upgrade you can buy for this car.

You won't gain a thing from a 'cold air intake' on a stock m20, it's been proven over and over.

Brody: That kit looks awesome! If I still had an m20 car I'd be all over it like a fat kid on cupcakes.

[E-Thirty]

Man, this is just looking better and better.