Miller WAR Chip software load axis

[Mako18]

Warchip have any hit tracing function? What are our logging options?

My ostrich 2.0 and tunerprort combo has real time hit tracing but still trying to figure out a data logger.

[nando]

How are you guys doing the timing tuning? Worried about knock?

Michael

use a dyno..

[fporro]

Thanks for info Brody, finally got RD headers so ready to fine tune it.

Do you have any tunes for m20's with itb's?
Tryed all 3 housings, medium one seems to work best so far.

[Tchao]

I think some of you guys are confusing this with a standard SpeedDesity type tuning where the cells directly mean fuel amount.

With the MAF, it's super simple as the values means AFR so to speak. The number itself isn't the same but the values mean the same. Find out what values brings you to...say 13:1 and set that value, say #130 across the board for part throttle and do small adjustments from there, again in a general area, not cell per cell. Say light throttle (ie cruising) you probably don't want 13:1 (130) so lean it a bit out, either that's a higher or lower value.

Correct me if I'm wrong. But MAF tuning is super easy if the kit is already calibrated.

[MonkeyMan]

subscribed! I'll try to get a screen shot of my p/t timing and p/t fuel maps, but I think I got them both nailed.. I had my car dyno tuned, but the most we could do in approx 2 hours of work was WOT settings..
I used those numbers as a good baseline and tuned the p/t settings to a smooth curve that transitioned from idle and no load to almost full throttle with heavy load..
I'm pretty familiar with the software now and will continue to make tweeks as necessary..

[rvaughnp]

Can anyone lead me to info on getting the graph software? And then how to transfer the WAR info to the program?

thanks.

[JCarp90]

Can anyone lead me to info on getting the graph software? And then how to transfer the WAR info to the program?

thanks.

https://www.millerperformancecars.com

[rvaughnp]

As much as i appreciate the link to Millers website... they don't have a link to any software or any info on where to get it.