I have a TPS off a e36 that I want to use for my megasquirt setup but it is different then the one everyone seems to use. The one I have is from a 328i and the plug is offset to one side instead of in the middle. Will I still be able to use this for my setup since I'm using it to replace the stock e30 one that is just on and off?
Announcement
Collapse
No announcement yet.
Question about e36 TPS for Megasquirt.
Collapse
X
-
you have the wrong TPS. one is for the traction control system and the other is for the ECU. you want the one for the ECU - they all look the same (small, centered).
*however*. it might be worth checking out how it works. MS doesn't really care where the TPS came from. you need to give it 5vref, ground, and measure the signal. if it measures a normal TPS sweep, it will work fine. you just need to figure out how to bolt it up.
-
Originally posted by nando View Postyou have the wrong TPS. one is for the traction control system and the other is for the ECU. you want the one for the ECU - they all look the same (small, centered).
*however*. it might be worth checking out how it works. MS doesn't really care where the TPS came from. you need to give it 5vref, ground, and measure the signal. if it measures a normal TPS sweep, it will work fine. you just need to figure out how to bolt it up.
Comment
Comment