Megasquirt options

[cgk_iii]

Which of these kits do i need to order for using MSII on my e30

[cgk_iii]

Im tired of searching through so many threads to get a simple answer

[cgk_iii]

http://www.diyautotune.com/catalog/megasquirt-ii-kits-c-30.html?osCsid=e50e9c3867cbcf8fbcf8be3f1e79888f

[Jaxx_]

There isn't a simple answer... Megasquirt is totally customizable, so it's hard to say what you need without knowing what you want.

Plug and play? doing it yourself? Do you need to drive 6 cyls or 4? 8? You have told us nothing about the setup that you want to run in your post.

Check out the feature table here:

http://www.msextra.com/feature-xref.html

I suggest MS2, but it depends on your needs.

edit: at the bare minimum you will need the following:

MSboard and MAP sensor
MS2 daughter board
Wiring harness

You will probably need, or use your existing:
Wideband
Timing setup
Ignition setup

[Northern]

If you don't want to be overly involved in ordering parts/assembly, look into the whodwho pnp setups. Tell him what you want to be able to do, and he'll make it happen.

[nando]

I would recommend a Whodwho PnP setup.

[kamotors]

^+1 to that, Kieth is an awesome member and EXTREMELY helpful.

[imwhyteyo]

I would recommend a Whodwho PnP setup.

This is the route I chose.. he's been absolutely outstanding with help. Show him your actually interested In learning and not just looking for the easiest answers