Originally posted by george graves
View Post
Announcement
Collapse
No announcement yet.
wideband opinions
Collapse
X
-
Originally posted by OmarE30 View PostI recently added MSPNP2 to my m20b25 and I'm having some issues with Wideband.
I installed the APSX D1 Wideband with controller and I'm having issues with it reading into MegaSquirt. There are 5 wires Black(ground),Red(12v),Green(screen display), Brown(narrowband) and white(analog). am I suppose to run a wire from analog to my actual ECU or connect narrawband from the car harness to the analog wire from the Wideband.
Comment
-
I used "Just Another Wideband" with success in the past. They changed their name to 14point7.com. Used to sell open source kits and/or instructions to build your own controller.
I built a couple of their DIY JAW kits back in the day, then they went on to surface mount and you just added a few full size components, but now with their controllers are pre-made and only $75. (https://www.14point7.com/products/sp...a-controller-2) The owner Alan To was always very helpful and answered emails straight away. I still have a working JAW in my sensor cabinet.
Comment
-
No. The Lc-2. They are the only company that is actively updating their software and firmware - and they know how to protect a wide band sensor, and keep it calibrated. Yes, there are a bunch of other out there, but these guys actually know what they are doing IMHO.
PS - no affiliation.Originally posted by Matt-Bhey does anyone know anyone who gets upset and makes electronics?
Comment
-
Originally posted by LowR3V'in View Postyou can also compensate for grounding offsets for better accuracy.
idk if lc2 does that tho. recently replaced the old lc1 & old ass 4.2lmu.Originally posted by Matt-Bhey does anyone know anyone who gets upset and makes electronics?
Comment
-
idk what that is but this is how he does it if interested.
There is a companion video available here In this article I will be discussing and demonstrating how to maximize accuracy (or minimizing errors) when interfacing your Spartan Lambda Controller 2 to your MegaSquirt ECU. I will be utilizing the Output Sequencer feature on Spartan 2 to achieve maximium accuracy, this arti
Comment
Comment