About Maf

[japspecvr6]

does anyone know what would i need to complete a maf swap.....and how much would it cost to do

[Jordan]

UniChip engine management.

$1200 or so installed and tuned.

[japspecvr6]

where do i get that from..... :D :D

[Jordan]

http://www.unichip.us/

Find a local dealer

Call for a quote

[japspecvr6]

the people around my area is out of service...... damn..... could you some info about this like installation, improvement,can i use it on a stock block

[Jordan]

if you have a stock engine do not waste your money.

[diegom6]

UniChip engine management.

$1200 or so installed and tuned.

wow! expensive! :shock:

[japspecvr6]

point well taken ;)

[diegom6]

point well taken ;)

I rather take a Haltech Unit magnament and a wide bad sensor and have plenty of options over that! And no it won't more expensive.

[japspecvr6]

point well taken ;)

I rather take a Haltech Unit magnament and a wide bad sensor and have plenty of options over that! And no it won't more expensive.

point well taken ;) ;) ;)

[gstuning]

to succesfully complete a MAF swap, you need to have a maf´s voltage output the same as a afm´s for the same airflow,

how you go about doing this depends, cheapest would be to get a wideband, hook the maf in and have a piggyback to tune, then you can map out the afr´s over time,

[japspecvr6]

to succesfully complete a MAF swap, you need to have a maf´s voltage output the same as a afm´s for the same airflow,

how you go about doing this depends, cheapest would be to get a wideband, hook the maf in and have a piggyback to tune, then you can map out the afr´s over time,

would this b worth it on a stock motor

[BahnE30]

NO

[gstuning]

to succesfully complete a MAF swap, you need to have a maf´s voltage output the same as a afm´s for the same airflow,

how you go about doing this depends, cheapest would be to get a wideband, hook the maf in and have a piggyback to tune, then you can map out the afr´s over time,

would this b worth it on a stock motor

It will aid in throttle response, thats for sure.

[Digitalwave]

You have other options besides Unichip. You can do it with a lot of tuning using an SMT-6 piggy back, costs about $400 for SMT-6 + another $100 or so for the MAF. Split Second also sells a MAF conversion kit for $800-900.