Bliks Supa Chaga Build

[iXe<30]

yeah im playing.... just excited because this will determine my plans for "nikka" Also.. shifting with a bumb leg... good luck

[TheBlik]

not yet haha, need a 3.5 in maf, i bought the wrong one, so i need to get the right on and some couplers

[iXe<30]

YouTube

[TheTacoMan]

weiweoweiweiwiewoewoeioieoeioweoweiweoeowewweeeeee eeeeeeeeeeeeeeeeee

I cant wait to hear this in person

[TheBlik]

OKIE DOKIE (: so got the belt installed and the super charger whine is great (: Only problem is, i bought the wrong MAF housing so im running a 2.7 lol. just need to swap them out and get a wide band gauge.

[TheBlik]

jumping down a hill, the back end came out to the left. bike bounced off the ground the right side came out i high sided and rolled over my knee in many fashions :/ oh well, its bolted on, ducting is on, fan is on (not working yet :x ) just need to get the electric fan working, slap on a belt and boooooooost every where.

[iXe<30]

shit. good luck with the recovery... happen on the bike? anyways excited to see progress

[TheBlik]

got my green giants. and 3.5 in maf going to attempt to install today. Don't know if you care of not. tore both acl and mcl, need surgery in two weeks.

[TheBlik]

so i did not get a chance to work on the car. slept all day went motorcycle riding and blew up my knee cant do anything to it till im semi mobile sorry guys :/

[TheBlik]

Well we'll see in about a week. Just bought 42 lbs injectors and a 3.5 in MAF housing. Today in going to take out the radiator install new pulley delete power steering, install new thermostat, and electric fan conversion. And pressure wash the side of the block all the work is being done on, scavenge some piping and move oil cooler lines over a bit more ill try to get some pics.

[iXe<30]

That would be a pretty cool deal man. Only problem, depends on what blower you get. Now if you got an Eaton 207018 or "m45" i might be able to help you real easy. But if not, im gonna have to get a lot of specs from you. Go for a c230 blower they are cute (:

well since im quite the noob.... id probably just stick with the same setup asuming you have nice gains

[TheBlik]

That would be a pretty cool deal man. Only problem, depends on what blower you get. Now if you got an Eaton 207018 or "m45" i might be able to help you real easy. But if not, im gonna have to get a lot of specs from you. Go for a c230 blower they are cute (:

[iXe<30]

I wants super charger..... If you still have the templates and some time in the next few weeks.... want to maybe sell me a sorta super charger mounting kit? maybe...

[TheBlik]

'ssssssssssssssssssscuz meh 3.5 in MAF fo boooooooost :) here are a few more pics.
JB weld to cover the nasty welds and seal it off better... hopefully...


had to cut off that two in to fit better.


as you can see the blower still hits the Oil cooler lines (OCL) i moved them back to the stock area then some bent the lines harshly, so i might have to go with a steel braided flexy line. I have searched some forums about the fittings but everyone gets all confused and gives out wrong info. Anyone has the knowledge about the fittings BUMP for answers :)

[kamotors]

^3.5" maf fo boost