Turbo E30 exhaust??

[jaywood]

4" from turbo to tip

:eeek::eeek:

[LowR3V'in]

600+hp

[kamotors]

kamotors your e30 is bad ass what ecu are you running? I get the manifold on friday so i will have it bolted up and seeing how the downpipe fits, but if its to close im doing some cutting.

whodwho PNP megasquirt

[e30leigh]

im rhd and going to be running 3" off the turbo and spiltting to dual 2.25" when the down pipe gets under the car.

im doing it for ground clearance and the dual 2.25" will flow slightly more then the single 3"

[classified]

I have a 3" aluminum exhaust on mine from the downpipe to the muffler. The whole center section weighs in at 6.2lbs. I have ran the piss out of the car, and no problems with the exhaust yet.

[e30leigh]

nice. brave with the alloy

[classified]

nice. brave with the alloy

Yeah, that is what I was thinking- I have seen them fail before. Made sure to made it solid to keep it from falling apart.

[e30leigh]

what wall thickness?

[E30BTR]

got the turbo on Im curently waiting for the fmic kit, wg and ecu to arrive. i have to do a side exhaust out the finder. fml its loud. ill post pics soon!

[E30BTR]

Here are some pics of the turbo on the car. I still need to clean up the finder with some carbon fiber (more pics coming) and make the bracket for the coolent resovior.

[Cronopoulos]

Here are some pics of the turbo on the car. I still need to clean up the finder with some carbon fiber (more pics coming) and make the bracket for the coolent resovior.

Is that dumped out the fender?

[E30BTR]

yeah. I couldnt go anywhere with the downpipe, with the steering rack in the way. so keep it na- not going to happen, go out the hood- gay or out the finder also gay. are you going to be out friday?

[Cronopoulos]

yeah. I couldnt go anywhere with the downpipe, with the steering rack in the way. so keep it na- not going to happen, go out the hood- gay or out the finder also gay. are you going to be out friday?

Shoot some better pics of the exit location if you could. Yeah I should be out...

[classified]

what wall thickness?

16 gauge, 0.065"

[E30BTR]

Sorry I don’t know what the thickness is but it’s made out of 304 Stainless Steel and seems to be solid, the welds are good and all the ports have been grinded down. I have some high pressure quick disconnects I want to use for the oil and water so when I get some time ill pull the turbo off and take some pics of the manifold.

16 gauge, 0.065"