just baught a h1c, might have made a mistake..

[Kozworth]

I just ordered a h1c off ebay, supposibly the 8 blade.

Inducer is 2.74 inches or 69mm and exducer is 3.18 inches or 80mm.

From researching I read most are around 50mm or biggeszt I've szeen was 58mm. I am wondering if the sellers specs are off, or if this is even a h1c.

I am looking for a basic setup, to get spool early. Is this turbo stillusable for a 2.7 turbo? I am stupid and was ordering on m/y phone.

[Hey_You]

I'm sure a picture or 2 might help with stampings

[Kershaw]

i dont know how you're going to afford the rest of the set up.

[Kozworth]

I'm looking for info and not flaming please, there was only oone site that really explained holset sizing well from multiple google searches.

I don t have a picture of the stampings

[LowR3V'in]

It's not a h1c what that big wheel.

[Kozworth]

It's not a h1c what that big wheel.

http://www.ebay.com/itm/zxesH1C-Cummins-6BTA-Holset-Turbo-Charger-1988-1993-5-9L-ISB-12-VALVE-/120997911969?pt=Motors_Car_Truck_Parts_Accessories&hash=item1c2c099da1&vxp=mtr

This is the 3rd H1c on ebay from 3 different sellers, all the same sizing compressor, all claiming its a h1c and all 8 blade. I read that you need one from an early 90s cummins and this link says it fits this assumption.

Everything is the same specs of the turbo i ordered, compressor/turbine sizing, inducer/exducer sizing, etc. Yet all claim to be a h1c.

[Hey_You]

I would stick to a HOLSET h1c, those are the only ones that came on the dodge diesels (if you are going to be buying a turbo, stick with a name rand if you can)

[jaywood]

Real Holsets are cheaper than that...You can find a nice used Holset pretty frequently if you scour forums.

[Kozworth]

Well, apparently the guy measured wrong, its a 52mm/83, which isn't a h1c eithor. I guess we will see what happens when I get it ha